For the alarm clock, just click on the Aqara Hub icon in Mi Home and then click ‘auto’ then you should see an option for the alarm clock. Aqara gateway / hub Quick setup . All set up in the Home App. 4. manually flip the switch in the Apple Home app. Malheureusement, je n’ai aucune réponse pour vous. why Firmware version have you got on the hub? I don’t think you’ll be able to get them to be exposed to HomeKit with the TrÃ¥dfri gateway, even with the two hubs. Sometimes that works better, although once you have added the code, wait for a while until you see the right icon, as sometimes two different icons show up – a triangle hub symbol and a house symbol. Hey, fantastic website. This added to a slightly higher price than the Gateway V2 makes it less recommended unless compatibility with the Apple HomeKit is sought. At this point, do you know of any way to either: 2.) ensure that you have a 2.4gHz wifi network available. can you send me a link to the specific light bulb you’re talking about, so I can see which one it is? Bear in mind that not all devices that can possibly be added to the Mi Home app actually need a Hub to work, so for these types of devices (usually wi-fi or Bluetooth based), you’re more than likely not going to see them get exposed to HomeKit for the time being, as they’re not going through the Aqara Hub, which is essentially the gateway to HomeKit. Here is how it worked with me: Now the question is will firmware updated will go ok with Aqara Hub under Xiaomi Mi Home app? If you have purchased one of these Gateways you should know that in order to use it in My Home you must have the gateway updated to firmware 1.4.7 or higher. Now, I can have automation and control with Mi Home app but can not use it with Siri. so, First regarding the air purifier, are you saying you want to plug it into an Aqara Smart plug? I’ve added a couple of sensors under the Alert Trigger Device, namely Motion Sensor, Door Sensor and even Wireless Mini Switch. I’ll be doing a post today hopefully that shows you how to do it, which should be straightforward, although I’ve not set one up in the Mi Home app yet. The alarm system appears to be able to be turned on/off. Good luck, and happy new year to you too. Save the automation and name it. If you want to use the Mi Home app, please restore the factory Do you have any suggestions? click on this and you should see your Hub. The only hub that allows this is V2 of the Chinese Mijia Hub, and even then it’s only Chinese radio stations. Air conditioning connected to the plug, unattended mode of air conditioning (ie without connecting to the plug), electric water IR and smart socket of 16 Amps. Then the two devices (light, security system) were added to the Home app, but there’s nothing under the Homekit tab in the Mi app. Thanks for the suggestions, and Happy New Year !!! But impossible to set up my cube (doesn’t appear in the other region devices list) Ok simon. I cant see anything stated anywhere on any site. I want to add the Xiaomi 2s Air purifier to the Aqara upgraded smart socket to set up local automation as currently this is very buggy on my phone and only seems to work sporadically at best, is this possible? Hi, been following your advices, but i just can’t make my Aqara hub connect to my network, all i get is the flashing blue light. So in order to use the Bluetooth Gateway must have one of the following devices: ● Global payment options: Visa, MasterCard, American Express, ● PayPal, Western Union and bank transfer are accepted, How to use IMEI number to track your lost Android phone, Country-based mobile phone network frequency bands coverage guide, Anycast M2 Dongle Guide | Connect any phone to your TV, How to connect GEN GAME S3 gamepad to Android, iOS and PC, Mi Mover: transfer any data from old phone to Xiaomi device, 3 reliable ways to verify if your Xiaomi device is original, Creality Ender-3 V-slot Prusa I3 DIY 3D Printer Kit 220 x 220 x 250mm Printing Size, Prev article:Huami AMAZFIT Verge smartwatch troubleshooting guide, Next article:Solution to MITU Mini Drone WiFi connection problem to the Android mobiles. It is nice to see that people are willing to help other people. Just make sure that if you ever do open the Aqara app, ignore the ‘bind accessory’ pop up window. ZigBee devices have one of the lowest power transmitters, but a very sensitive receiver. I’ve been able to update the firmware and that was the key to solve my problems (adding the Aqara Hub and sensors to Mi Home. I notice that, at the top of the Aqara app it refers to my house simply as “My Home”, and not as the name given to my home in HomeKit. Copyright © 2021 Homekit News and Reviews. Since it is designed for high power devices it uses a different connector from the standard, it is 3 AU type plugs wider and thicker designed to support 16 amps. Am I missing something here? How to solve the weather update problem of Xiaomi Mi band 4? Scroll horizontally until you see a ‘HomeKit’ tab. You shouldn’t have something like a. When I go to settings> Support Mi Home app, it says No. I have the same problem. The HomeKit tab is no longer there in the Mi Home app though, which I think will only appear is there’s a hub (or other device) that is waiting to be added to Mi Home. If you have in any way selected the hub to be sent to the Mi Home app, it will then pair with that app, but seemingly nothing has happened, except that all your devices and the hub should disappear from the Aqara app. Therefore, ZigBee can be considered one of the safest and most environmentally friendly wireless standards today. Aqara Hub and Mi Home – Troubleshooting Tips [updated – Dec. 5th), Arlo Baby Cam Firmware Update Brings 5 New Features to HomeKit, HomeKit Automation With Eve Light Switch and Koogeek Door Sensor, How to Install The Lutron Caseta Dimmer Switch – single pole or 3 way circuit, https://community.aqara.com/forum/faq-1/topic/hub-firmware-updates-when-connected-to-mi-home-app-749. Water Leak Sensor. In mi home app everything is normal. Hi Christian I already have automation’s on the 2s through the Mi Home app, however they do not always work as I think the app needs constant wifi enabled and the app always relaying data for them to work. But changing SSID will be a big headache, as i have many smart home devices and even a Home Assistant server running. I assume I’m looking at creating an automation within the Home app, but I’ve still not found out how to configure it. Today I received an aqara temperature sensor. It maintains the same characteristics and construction materials as the Aqara A/C Companion but takes a round shape more in line with the design line of the Mijia range. I did the installation using the Mi Home app and it paired and seems to be working. Sadly, many users (including myself) have also experienced issues, ranging from the simple, to the seemingly near catastrophic. Good luck. You’re welcome! It turned out that a restart of my iPhone solved the issue. Seems pretty buggy for me. Initially, it was presented as a Homekit-compatible Gateway that would also work only in the Aqara app and only compatible with Aqara's ZigBee line of devices. For JN5169 (ZigBee), it is 96 dBm. Hi Dave, I’m aware of the Air Con Plug/Hub, but don’t know anything more than the basics, mainly as our air con units are all already hardwired. It sounds as though the easiest option is to set up a new account, set to Mainland China, then check for firmware updates. Any ideas about get it work with Homekit? Trying to add any devices (which I know worked with the Aqara app) brings up a message saying you need the mijia hub. Same problem here. So sometimes these devices will appear as offline or not appear at all. Following instructions from Aqara site, I never managed to get it to pair with the Aqara Home app. Installed it to the mi home app according to the steps If you do this, it will be taken out of the Mi Home app. As both link through the Mi Home app via wifi, I was hoping the data of the 2s could be accessed by the Hub and used for automation’s. You can also only update the hub if you’re signed into the Aqara app and have Mainland China as server region. If I reset and start fresh in the Aqara app, there are no issues – binding completes. I even upgraded firmware to 1.5.0 and all seems to be good. I should be on the latest versions of both iOS and aqara os. Door Lock. Every time I set up my hub it appears in other region but not in mainland china, even if I do the whole process in mainland china. Here’s my question: following your instructions, I was able to add the Hub using the Aqara Home app. Both HomeKit compatible. The Aqara Hub works in the same way as the Hue Bridge works in relation to HomeKit, in that the Hub itself is HomeKit compatible, not the devices themselves. I have an aqara hub which works fine with apple HomeKit using ttphe mi app. I no longer able to add to the Apple Homekit after I upgraded to 1.5… I will have to try resetting it again… when I have time. I added a Mi zigbee smart plug. It found the hub, added it. Simon, you got it. Because i only used 1 aqara hub in mihome app. I have the same problem. Are you using anything like a VPN that could be causing an issue? I also have the door lock and Ecobee 4 which I haven’t installed yet. One question I should ask is, do you have a device that is set to trigger the alarm (not set the alarm)? How to connect Aqara hub to iOS and Android devices? But you can make the light come on. If so, any smart plug will suffice, but you’ll only be able to turn it on and off. Clearly, I know that you are not Aqara tech support, but your walk-through has been better than any of the support I’ve gotten from Aqara. So it worked all the way to step 13. The only thing i didn’t try was the SSID, as in mine i have one apostrophe… Aqara Hub. More Products. 2. Basically the problem I had with the Hub in the Aqara app saying it would ‘No’ next to the message ‘Connect to Mi home app’. This combination provides a positive effect, as it has a much lower degree of exposure of people in the area of the ZigBee network. But as long as I didn’t press the button 10 times to completely reset it, it should stay on the current firmware, right? Just Now i deleted all devices is connected to my first aqara hub. HomeKit News is not in any way afflilated or endorsed by Apple Inc. or any subsidiary companies related to Apple. I guess that I had to start from scratch for the hub and every single sensors? Resetting your wifi SSID shouldn’t have any effect on the devices that go through the hub, as they’re not connecting via wifi, but using Zigbee. If you plug in the airport express, and set up a new network, as far as I’m told, this actually creates a subnetwork, so even though the SSID is different from the main network, it’s actually part of the same network. But Xiaomi gateway doesn't have a radio and it has the MI logo in the center. Also, is this something I should try & set up in the Mi Home app initially (and avoid the Aqara app completely)? Everything looks like yours procedure….and I didn’t set any kind of automation. Mi Community Global. Sept 25th was the original date, but it may be just a slight delay if they bring them out at the start of October. I recently Jan 19 purchased an Aqara hub and sensors. I have got one of my Aqara hubs running in the Mi Home app, but my second Hub is still connected to the Aqara app at the moment, so I’ve not experienced this yet. Sometimes it doesn’t work as intended as you’ll need to re-pair your devices unfortunately. it will say there is more setting up to be done. My problem is that when the allarm is disarmed…if the sensor feel a vibration the hub sounds allarm tone….what can I do for to fix this problem? Well. Limited Time Sale Easy Return. Try again.’. Use a second Hubitat hub or SmartThings dedicated to just Xiaomi / Aqara devices and "compatible" repeaters, and use @srwhite's amazing HubConnect app to share devices to your primary hub. Tap in the three dots to open the advanced options. Do you have any idea why I can’t update the hub? It is a particular device by mixing both functions, camera and gateway in one. ahhhh… I don’t mind if this is China region but I have to re-do the setup again lol…, Do you also use the Yi camera under mi.app? The hub is simply not there. Step 14: click on this and you should see your Hub. I went into the settings and it now says that it’s not able to connect to Mi Home app. 3. Limited Time Sale Easy Return. I can only turn on and off and set the switch-on time the rest of the settings does not work. tout ce que j’explique dans les guides, sont les solutions que j’ai, alors si elles ne fonctionnent pas, je n’ai plus de suggestions Pardon. Aqara Wireless Mini Switch, Requires AQARA HUB, Zigbee Connection, Versatile 3-Way Control Button for Smart Home Devices, Compatible with Apple HomeKit 4.5 out of 5 stars 175 $17.99 Or can you only add sensors for example to the hub by being logged into the Aqara server? But I can’t add the plug with Aqara app anymore, the hub says “device connected”, but the counter on the app just running down. Although I have many more questions I will leave it at that for now. Does it work properly? Any suggestion for that? Any idea ? I’m stuck at 1.4.5, does the Aqara Hub offer something else? Motion Sensor. By  Sigismondo Eisenhower 2019-07-19 44211 0. But I saw on Aqara forums that many has experienced bugs on that version. That's why today we're going to try to clarify these doubts and see the differences between them. Very frustrating. Hi, Hey! They can be added to the Mi Gateway, but then that isn’t HomeKit compatible. Help, ask away and I’ll try and assistance, but hopefully it’ll all be ok. Is anybody know when it will be possible to activate local network protocol on it? Here are the two methods; Method #2 is probably better, as it only lists the devices that require the Aqara hub, so you know where you stand, but if you want to add a device regardless of whether it uses the hub or not, then method #1 is probably better. As Xiaomi's Mi Home ecosystem has several changes and developments. I’m thinking of resetting the hub, but I’m scared thinking what a nightmare it was to get paired the first time. Ils existent actuellement plusieurs capteurs complètement différents et nous verrons dans cette article le détecteur de température et d’humidité Aqara … And what’s the version of the Aqara app? If I touch “No” to change it, an X appears with some text below it and it stays at No. Make sure all the other procedures are followed (2.4gHz only etc) and it should be able to connect. Thanks for this step-by-step for adding the Aquaria Hub, I’ve followed your instructions and got much further than I did on my own. Global Global Asia India Việt Nam Indonesia ... Aqara Hub: Alarm delay. That’s coming, apparently. Some devices are still not HomeKit compatible. G2H. However, the info pertaining to them, may not be 100% accurate, as we solely rely on the information we are able to gather from the companies themselves or the resellers that stock these products, and therefore cannot be held responsible for any inaccuracies stemming from the aforementioned sources, or any subsequent changes made that we have not been made aware of. Check to see if the app is v1.4.5 and also double check that you’re actually signed into the Mainland China server, as when it’s updated from the previous version it signs you out. If you’re interested, drop us a message using the Contact section of our site. So that could be a Motion Sensor or a Door Sensor for example. There are quite a few resellers on AliExpress now selling the new Aqara Hub, so there’s plenty of choice, but if you want to wait for the US or EU hub, Aqara recently stated that they’d be out in October. Would you like to contribute to our website? Anyone noticed this as well? Do you have any suggestions on how to fix this issue? Do you have any idea to fix that? If you want to set one of them appears chimney Failed to set .Why is it not working ? These should be set as the trigger devices that make the alarm sound. I recall this happened just the once, and doing this sorted it quite quickly. The long-awaited Aqara Hub M2 is now beginning to make its debut in Europe, with North America hopefully to follow sometime in the first half of 2021. What version of the Aqara app are you running? On the other hand, the smart plug function will allow us to operate in 4 different modes. These are the lamp settings in the Mi Home application . I can’t think of any other reason why you aren’t able to update. G2H. Supports up to 50,000 presses*. In the app? Sensor. So, I’m going to try and reset the hub to see if it will be recognised by the Mi Home app, and just avoid the Aqara app totally. Click on the ‘+’ symbol in the top right of the home screen. 3. manually tap on Enable Alert in Hub’s Gateway page in the Mi Home app I have tried to add the Aqara Hub as a device and have gone through the steps as mentioned on your site. Does it say there’s an update available? I uninstalled and installed the Aqara Home app. All 6 of them I own, are working within the Aqara App but none of them are exposed to the Apple Home App. Every time I go into the Mi Home app and click on the HomeKit tab, the Mi Home app crashes. To be honest, I’m actually not even sure if the Ikea bulbs listed on the Mi Home app are even TrÃ¥dfri, although I don’t think Ikea do any other smart bulbs beside the TrÃ¥dfri range anyway. Hope you can help me. continue the hub setup in the Aqara app? Adopts V-0 grade flame-retardant PC panel that allows for high temperature resistance. Check this: https://community.aqara.com/forum/faq-1/topic/please-check-which-hub-version-do-you-have-982 Click on it and it will go through a sort of pairing process, to complete the procedure. 2019-09-08 18:02:22. Hi, ok i think i know what you mean, ill try to connect my Airport Express to one of the nodes on my network, better than reconfiguring all my devices to new SSID. in the Mi Home app, across the top, above the device tiles, there are a list of rooms. Après avoir suivi la marche à suivre (dont les 10 clics, qui chez moi n’ont pas fait parler le hub du tout), me voila complètement bloquer. You can’t create a flashing light unless it’s an alarm. I tried the Mi Home app, and I coud add the plug but now it does not appear in Home app. Watch this video to … You can have the hub in the Aqara app or the Mi home app, but if you’re in the Aqara app and you go to the settings for the Hub, there’s a section that says ‘Support Mi Home app’ and then ‘Yes’. No difference using Aqara app or mi home. As regards the 1.5.0 update, I’m not sure whether it has been pulled or not as both of my hubs are already updated. I don’t even know what’s the firmware version in the hub or update it. Sammenlign priser og læs anmeldelser af Aqara hub. You can add it in MI Home but it dosen’t show in homekit as it did before. Hope you will get any solution for that. Sometimes it’s the simple things that work! Hi, did you follow method #2 when adding the device? I’ll ask a colleague of mine in Shanghai, who I believe has one and get as much info as I can and get back to you. I know it probably sounds obvious, but have you tried unplugging the hub and then plugging it in again. So I tried to switch to other region, and now the hub is present and work perfectly with homekit. Single Switch Module T1 (With Neutral) Single Switch Module T1 (No Neutral) Cube. Hello Simon, It’s also possible that other devices may show up. Thanks so much for the help going down this rather confusing path. Any of the devices that need a hub – that is to say Zigbee-based ones like the sensors for example – can be added to the Aqara Hub. Avez-vous une idée pour comment régler la situation? Controller. Also check out the Vocolinc Smart diffuser as a novel new device, or the new Mijia Bedside Lamp. There are two methods of adding new devices in the Mi Home app, which I have listed at the end of this article. Cheap Smart Remote Control, Buy Quality Consumer Electronics Directly from China Suppliers:Aqara Hub Mi Gateway smart work with Apple Homekit and aqara smart home App with RGB Led night light Enjoy Free Shipping Worldwide! With the older version you can upgrade the Aqara Hub to the newest firmware (currently 1.4.7), following this you can then upgrade the Aqara Home app to the latest version while keeping the connection to the Hub. More Products. I’m not a network expert as such, so i don’t have a full understanding of how all of it works, but essentially in my home we have a cable modem. It is an update of the Aqara A/C Companion - KTBL01LM. Installing devices via the Aqara Hub once in the Mi Home app